Removal

AUDIO / VISUAL: STEREO COMPONENT AMPLIFIER: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY Removal
4. REMOVE ROPE HOOK ASSEMBLY Removal
5. REMOVE ROPE HOOK Removal
6. REMOVE DECK TRIM SIDE BOARD RH Removal
7. REMOVE REAR FLOOR FINISH PLATE Removal
8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Removal
9. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM HOOK (W/O Rear Cooler) Removal
10. REMOVE LUGGAGE COMPARTMENT TRIM COVER FRONT Removal
11. REMOVE NO. 1 COOLER COVER (W/ Rear Cooler) Removal
12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH Removal
13. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET
(a) Disconnect the connectors.
(b) Remove the 4 nuts and amplifier with bracket.









14. REMOVE NO. 1 AMPLIFIER BRACKET
(a) Remove the 2 screws and bracket.





15. REMOVE NO. 2 AMPLIFIER BRACKET
(a) Remove the 2 screws and bracket.