Panel Switches do not Function

NAVIGATION: NAVIGATION SYSTEM (for HDD): Panel Switches do not Function

Panel Switches do not Function

INSPECTION PROCEDURE

PROCEDURE

1. CHECK PANEL SWITCH
(a) Check for foreign matter around the switch that might prevent operation.
OK:
No foreign matter is found.
NG -- REMOVE ANY FOREIGN MATTER
OK -- Continue to next step.

2. CHECK PANEL SWITCH (DISPLAY CHECK MODE)




(a) Enter the "Display Check" mode (Panel Switch Check Mode) Display Check Mode.
(b) Operate the abnormal switch and check if the switch name and status are correctly displayed.
OK:
The switch name and status are correctly displayed as operated.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- REPLACE DISPLAY AND NAVIGATION ASSEMBLY