Display Signal Circuit between Multi-display Controller and Television Display

AUDIO / VISUAL: REAR SEAT ENTERTAINMENT SYSTEM: Display Signal Circuit between Multi-display Controller and Television Display

Display Signal Circuit between Multi-display Controller and Television Display

DESCRIPTION

This is the display signal circuit from the multi-display controller to the television display.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MULTI-DISPLAY CONTROLLER - TELEVISION DISPLAY)




(a) Disconnect the R30 controller connector.
(b) Disconnect the R19 display connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE