Removal

AUDIO / VISUAL: STEREO JACK ADAPTER ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY Removal
6. REMOVE NO. 3 BOX PANEL Removal
7. REMOVE REAR CONSOLE PANEL UPPER Removal
8. REMOVE CONSOLE PANEL SUB-ASSEMBLY UPPER Removal





9. REMOVE CONSOLE BOX POCKET LOWER
(a) Disconnect the connector.
(b) Detach the 8 claws and remove the console box pocket lower.
10. REMOVE STEREO JACK ADAPTER ASSEMBLY





(a) Detach the 2 claws and remove the adapter.





11. REMOVE CONSOLE BOX POCKET LOWER (for Ottoman)
(a) Disconnect the connector.
(b) Detach the 8 claws and remove the console box pocket lower.
12. REMOVE STEREO JACK ADAPTER ASSEMBLY (for Ottoman)





(a) Detach the 2 claws and remove the adapter.