Removal

WIPER AND WASHER: HEADLIGHT CLEANER ACTUATOR: REMOVAL

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal
2. REMOVE RADIATOR GRILLE PROTECTOR Removal
3. REMOVE FRONT BUMPER ASSEMBLY Removal
4. REMOVE HEADLIGHT CLEANER WASHER NOZZLE





(a) Extend the headlight cleaner washer nozzle.
(b) Remove the headlight cleaner washer nozzle.
HINT:
Use the same procedures for the RH side and the LH side.

5. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY





(a) Disconnect the headlight washer hose.
(b) Remove the bolt.
(c) Disengage the 2 claws and remove the headlight washer actuator sub-assembly as shown in the illustration.
HINT:
Use the same procedures for the RH side and the LH side.