CAN Communication System

CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: TERMINALS OF ECU

TERMINALS OF ECU
HINT:
This section describes the standard CAN values for all CAN related components.

1. CAN J/C (CAN LH J/C, CAN RH J/C)
HINT:
- The connectors connected to the CAN J/C can be distinguished by the colors of the bus lines and the connecting side of the junction connector.
- The connectors can be connected to any terminals on the same side.

(a) CAN LH J/C





Wiring Color:





Wiring Color:





(b) CAN RH J/C





Wiring Color:





Wiring Color:









(c) The terminals on connectors for the CAN J/C






(d) Wiring diagram for identifying CAN J/C connectors





2. DLC3





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






3. SKID CONTROL ECU WITH ACTUATOR





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






4. STEERING ANGLE SENSOR





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






5. YAW RATE SENSOR





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






6. DISTANCE CONTROL ECU (w/ Dynamic radar cruise control system)





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






7. SEAT BELT CONTROL ECU (w/ Pre-collision system)





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






8. 4WD CONTROL ECU (for 4WD)





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






9. POWER STEERING ECU





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






10. CENTER AIRBAG SENSOR





(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






11. ECM
(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:










(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:






12. GATEWAY ECU
(a) Measure the resistance according to the value(s) in the table below.





Standard Resistance:










(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance: