Glove Box Lamp: Testing and Inspection

LIGHTING: GLOVE BOX LIGHT: INSPECTION

INSPECTION

1. INSPECT GLOVE BOX LIGHT





(a) Remove the glove box light.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:





If the result is not as specified, repair or replace the wire harness or connector.





(c) Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
(d) Check that the glove box light comes on.
OK:
Comes on
If the result is not as specified, replace the glove box light.