Map Disc Cannot Be Ejected

NAVIGATION: NAVIGATION SYSTEM: Map Disc cannot be Ejected

Map Disc cannot be Ejected

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MULTI-DISPLAY
(a) Turn the engine switch on (ACC).
(b) Keep pressing the MAP eject switch for 5 seconds and check if the disc is ejected by forced ejection.
OK:
The disc is ejected.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- Continue to next step.
2. CHECK MAP DISC




(a) Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on the map disc.
NG -- REPLACE MAP DISC
OK -- END