Removal

AUDIO / VISUAL: AMPLIFIER ANTENNA: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE ROOF HEADLINING ASSEMBLY
Removal
HINT:
Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY".

3. REMOVE AMPLIFIER ANTENNA ASSEMBLY





(a) Disconnect the connector.
(b) Disengage the clamp and remove the 2 nuts.
(c) Disengage the clip and remove the amplifier antenna assembly.
NOTE:
If reusing the removed amplifier antenna assembly, do not touch the contact terminals.