Removal

1UR-FSE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: REMOVAL

REMOVAL

1. REMOVE ENGINE UNDER COVER
2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE NO. 1 AIR CLEANER INLET Removal
4. DISCONNECT RADIATOR RESERVE TANK ASSEMBLY Removal
5. REMOVE V-RIBBED BELT Removal
6. REMOVE CRANKSHAFT PULLEY





(a) Using SST, loosen the crankshaft pulley set bolt.
SST: 09213-54015
90119-08216
SST: 09330-00021





(b) Using the pulley set bolt and SST, remove the crankshaft pulley.
SST: 09950-50013
09951-05010
09952-05010
09953-05010
09954-05010
7. REMOVE CRANKSHAFT TIMING GEAR KEY





(a) Remove the crankshaft timing gear key from the crankshaft.
8. REMOVE TIMING GEAR CASE OR TIMING CHAIN CASE OIL SEAL





(a) Using a knife, cut through the oil seal lip.
(b) Using a screwdriver with its tip taped, pry out the oil seal.
NOTE:
After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.