Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch

Driver Side Power Window Auto Up / Down Function does not Operate with Power Window Master Switch

DESCRIPTION

If the manual UP / DOWN function can be performed but the AUTO UP / DOWN function cannot, then the fail-safe may be functioning.
If the power window initialization Initialization has not been performed, the AUTO UP / DOWN function will not operate.
NOTE:
When the power window regulator motor assembly (on the driver side) is reinstalled or replaced, the power window control system must be initialized.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DTC OUTPUT
(a) Check for DTCs.
Result:






D -- GO TO DTC B2313
C -- GO TO DTC B2312
B -- GO TO DTC B2311
A -- Continue to next step.

2. READ VALUE USING TECHSTREAM (POWER WINDOW SWITCH)
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG) and turn the Techstream ON.
(c) Select the following menu items: Body / Master Switch / Data List.
(d) Read the Data List according to the display on the Techstream.

Master switch:





OK:
ON is displayed on the Techstream screen during AUTO operation.
NG -- REPLACE POWER WINDOW MASTER SWITCH
OK -- REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (for Driver Side)