Active Stabilizer Suspension System

SUSPENSION CONTROL: ACTIVE STABILIZER SUSPENSION SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC (USING TECHSTREAM)
(a) Connect Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Read the DTCs by following the prompts on the tester screen.
HINT: Please refer to Techstream operator's manual for further details.

2. CLEAR DTC
(a) Connect Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Erase the DTCs by following the directions on the tester screen.
HINT: Please refer to Techstream operator's manual for further details.