Removal

SUSPENSION: FRONT UPPER SUSPENSION ARM: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for AVS)
2. REMOVE ENGINE ROOM SIDE COVER Removal
3. REMOVE FRONT WHEEL
4. SEPARATE SPEED SENSOR FRONT (for 2WD) Removal
5. SEPARATE SPEED SENSOR FRONT (for 4WD) Removal
6. SEPARATE HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY FRONT (for 2WD) Removal
7. SEPARATE HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY FRONT (for 4WD) Removal
8. SEPARATE FRONT SUSPENSION UPPER ARM Removal
9. SEPARATE TIE ROD ASSEMBLY (for 4WD) Removal
10. REMOVE FRONT SHOCK ABSORBER CAP UPPER (for AVS) Removal
11. REMOVE ABSORBER CONTROL ACTUATOR (for AVS) Removal
12. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING (for 2WD) Removal
13. REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING (for 4WD) Removal
14. REMOVE FRONT SUSPENSION UPPER ARM





(a) Remove the 2 bolts and front suspension upper arm.