Removal

OTHER SYSTEM: CENTER POWER OUTLET SOCKET: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
6. REMOVE CONSOLE BOX PLATE Removal
7. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
8. REMOVE CONSOLE BOX Removal
9. REMOVE REAR CONSOLE ARMREST ASSEMBLY Disassembly
10. REMOVE CONSOLE BOX SUB-ASSEMBLY UPPER Disassembly
11. REMOVE POWER OUTLET SOCKET ASSEMBLY





(a) Rotate the socket to disengage the notch.





(b) Pull out the socket halfway and rotate the socket until its protrusion is aligned with the groove of the cover.
(c) Remove the socket from the cover.