Installation

OTHER SYSTEM: CENTER POWER OUTLET SOCKET: INSTALLATION

INSTALLATION





1. INSTALL POWER OUTLET SOCKET ASSEMBLY
(a) Align the protrusion on the backside of the socket with the groove of the cover. Then push the socket into the cover.
(b) Connect the connector.
2. INSTALL CONSOLE BOX SUB-ASSEMBLY Reassembly
3. INSTALL REAR CONSOLE ARMREST ASSEMBLY Reassembly
4. INSTALL CONSOLE BOX Installation
5. INSTALL CONSOLE BOX REGISTER ASSEMBLY Installation
6. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
7. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
8. INSTALL CONSOLE BOX PLATE Installation
9. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation
10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.