Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY





(a) Engage the 5 hooks (A).
(b) Engage the 5 hooks (B) and install the front passenger airbag assembly on the instrument panel.





(c) Install the 2 screws.





(d) Connect the 2 connectors to the front passenger airbag assembly.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL HEATER TO REGISTER NO.1 DUCT Reassembly
3. INSTALL SIDE DEFROSTER NOZZLE NO.1 DUCT Reassembly
4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Installation
HINT: Refer to the procedures from "INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY".

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. PERFORM INITIALIZATION
7. INSPECT SRS WARNING LIGHT