Removal

SUPPLEMENTAL RESTRAINT SYSTEM: DRIVER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE FRONT DOOR SCUFF PLATE Removal
3. REMOVE FRONT DOOR OPENING TRIM COVER Removal
4. REMOVE CONSOLE UPPER PANEL GARNISH FRONT Removal
5. REMOVE FRONT ASH RECEPTACLE ASSEMBLY Removal
6. REMOVE INSTRUMENT PANEL FINISH PANEL END Removal
7. REMOVE INSTRUMENT SIDE PANEL Removal
8. REMOVE INSTRUMENT PANEL UNDER NO.1 COVER SUB-ASSEMBLY Removal
9. REMOVE INSTRUMENT PANEL SAFETY NO.1 PAD SUB-ASSEMBLY Removal
10. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY





(a) Remove the 4 bolts and driver side knee airbag assembly.
(b) Disconnect the connector.
NOTE:
When handling the airbag connector, take care not to damage the airbag wire harness.