Removal

2GR-FSE FUEL: FUEL PRESSURE PULSATION DAMPER: REMOVAL

REMOVAL

1. PRECAUTION Removal
2. DISCHARGE FUEL SYSTEM PRESSURE Removal
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. REMOVE COOL AIR INTAKE DUCT SEAL Removal
5. REMOVE ENGINE ROOM SIDE COVER LH Removal
6. REMOVE ENGINE ROOM SIDE COVER RH Removal
7. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY LH Removal
8. REMOVE FRONT PILLAR TO FRONT SIDE SEAL SUB-ASSEMBLY RH Removal
9. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal
10. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal
11. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
12. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
13. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
14. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
15. DISCONNECT NO. 2 VENTILATION HOSE Removal
16. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE Removal
17. REMOVE FUEL PRESSURE PULSATION DAMPER





(a) Using SST, remove the fuel pressure pulsation damper and 2 gaskets, and disconnect the fuel tube from the fuel pump.
SST: 09612-24014
09617-24011