Removal

2GR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.





2. REMOVE ACCELERATOR PEDAL
(a) Disconnect the accelerator pedal position sensor connector.
(b) Remove the 2 bolts and accelerator pedal.
NOTICE:
- Avoid physical shock to the accelerator pedal.
- Do not disassemble the accelerator pedal assembly.