Driver Side And Front Passenger Side Power Mirrors Cannot Be Adjusted With Power Mirror Switch

MIRROR: POWER MIRROR CONTROL SYSTEM: Driver Side and Front Passenger Side Power Mirrors cannot be Adjusted with Power Mirror Switch

Driver Side and Front Passenger Side Power Mirrors cannot be Adjusted with Power Mirror Switch

SYSTEM DESCRIPTION

The integration control and panel assembly sends power mirror control switch RIGHT, LEFT, UP and DOWN signals through the multiplex communication line to the front multiplex network door ECU LH and RH to activate the mirror surfaces accordingly.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. READ VALUE USING TECHSTREAM (MIRROR MASTER SWITCH AND MIRROR CONTROL SWITCH)
(a) Check the DATA LIST for proper functioning of the mirror master switch and mirror control switch.
Integration control and panel assembly:






OK:
On tester screen, each item changes between ON and OFF according to above chart.
NG -- REPLACE INTEGRATION CONTROL AND PANEL ASSEMBLY
OK -- END