Electronically Controlled Brake System

BRAKE CONTROL: ELECTRONICALLY CONTROLLED BRAKE SYSTEM: DIAGNOSTIC TROUBLE CODE CHART

DIAGNOSTIC TROUBLE CODE CHART
HINT:
- If a trouble code is displayed during the DTC check, inspect the trouble areas listed for that code. For details of the code, refer to the "See page" below.
- Inspect the fuse and relay before investigating the trouble areas as shown in the table below.

DTC chart of ABS:

C0200/31-C0205/32:

C0210/33-C1235/35:

C1236/36-C1336/98:

C1381/97-C1442/44 U0073/94-U0124/95:

1 Drive the vehicle at a speed of 50 km/h (31 mph) and depress the brake pedal strongly for approximately 3 seconds.
2 Repeat the above operation 3 times or more and check that the ABS warning light goes off.
3 Clear the DTC.
HINT:
- In some cases, the Techstream cannot be used when the ABS warning light remains on.
- When U0073/94, U0100/65, U0123/62, U0124/95, U0126/63, U0130/68 or U0131/67 is output, inspect and repair the trouble areas indicated by these codes first.

DTC chart of VSC:

C1201/51-C1443/34:

C1445/66 U0100/65-U0131/67:

DTC chart of Electronically Controlled Brake System:

C1202/68-C1246/46:

C1247/47-C1312/12:

C1313/13-C1343/64:

C1344/65-C1357/24:

C1358/26-C1368/67:

C1377/43-C1392/48:

(*1): These codes are displayed to indicate the ABS and Electronically Controlled Brake System DTCs.

Test mode DTC of ABS:

C1271/71-C1281/81:

Test mode DTC of VSC:

C0371/71:

Test mode DTC of Electronically Controlled Brake System:

C1346/71: