The Other Caller Cannot Hear Your Voice, Or Your Voice Is Too Quiet Or Distorted

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

The Other Caller cannot Hear Your Voice, or Your Voice is too Quiet or Distorted

INSPECTION PROCEDURE

PROCEDURE

1. CHECK CELLULAR PHONE
(a) Check if the other side can hear your voice properly.
OK:
Your voice can be heard correctly.
NG -- REPLACE CELLULAR PHONE
OK -- Continue to next step.

2. CHECK SETTINGS




(a) Check if the mute switch is set to ON.
OK:
Mute switch is not set to ON.
NG -- TURN MUTE SWITCH OFF
OK -- Continue to next step.

3. CHECK SETTINGS




(a) Enter the "Handsfree Voice Quality Set" mode Bluetooth Tel Check Mode.
(b) Check if the Send Voice Level is set to "0".
HINT: The Send Voice Level can be set to 11 different levels, -5 to +5, with a 3 dB difference.
(c) Check if the Send Voice Level is set to the minimum or maximum level.
HINT: When the Send Voice Level is set to the minimum or maximum level, the sound may be distorted.

OK:
The Send Voice Level is set to "0".
NG -- SET SEND VOICE LEVEL TO "0"
OK -- PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE