Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
3. REMOVE REAR SEAT HEADREST ASSEMBLY
4. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
5. REMOVE REAR SEATBACK ASSEMBLY Removal
6. REMOVE REAR DOOR SCUFF PLATE LH Removal
7. REMOVE REAR DOOR SCUFF PLATE RH Removal
8. REMOVE REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag) Removal
9. REMOVE REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag) Removal
10. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag) Removal
11. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag)
HINT: Use the same procedure for the RH side and LH side.

12. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal
13. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal
14. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal
15. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH Removal
16. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH Removal
17. REMOVE REAR SEAT SHOULDER BELT HOLE COVER Removal
18. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade) Removal
19. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) Removal
20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade) Removal
21. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY





(a) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner connector as shown in the illustration.





(b) Remove the 2 bolts and the rear seat 3 point type belt assembly.