Removal

2GR-FE EXHAUST: EXHAUST PIPE:

REMOVAL

1. REMOVE EXHAUST TAIL PIPE ASSEMBLY
(a) Remove the 4 nuts and 2 exhaust tail pipes.





(b) Remove the 2 gaskets from the exhaust center pipe assembly.
2. REMOVE EXHAUST CENTER PIPE ASSEMBLY
(a) Remove the 2 bolts, 2 nuts and exhaust center pipe assembly.





(b) Remove the gasket from the exhaust front pipe assembly.
3. REMOVE FRONT EXHAUST PIPE NO. 1 SUPPORT BRACKET





(a) Remove the 2 nuts and front support brackets.
4. REMOVE EXHAUST FRONT PIPE ASSEMBLY
(a) Disconnect the 2 heated oxygen sensor (bank 1, 2 sensor 2) connectors.
(b) Remove the 2 nuts from the exhaust front pipe (left bank exhaust manifold side).





(c) Remove the 2 bolts from the exhaust front pipe (right bank exhaust pipe manifold side).
(d) Remove the exhaust front pipe.
(e) Remove the 2 gaskets from the exhaust front pipe.
5. REMOVE HEATED OXYGEN SENSOR (for Bank 1) Removal
6. REMOVE HEATED OXYGEN SENSOR (for Bank 2) Removal
7. REMOVE REAR EXHAUST PIPE NO. 1 SUPPORT BRACKET





(a) Remove the 2 bolts and rear support bracket.