Removal

WIPER AND WASHER: WIPER SWITCH: REMOVAL

REMOVAL

1. REMOVE STEERING COLUMN COVER (w/o Driver Monitor Camera)






(a) While turning the steering wheel to the right and left, remove the 3 screws.
(b) Detach the 2 claws to remove the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.





(c) Detach the 4 clips.
(d) Detach the claw to remove the upper steering column cover.
2. REMOVE STEERING COLUMN COVER (w/ Driver Monitor Camera)






(a) While turning the steering wheel to the right and left, remove the 3 screws.
(b) Detach the 2 claws to remove the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.





(c) Detach the 4 clips.
(d) Disconnect the connector.
(e) Detach the claw to remove the upper steering column cover.
3. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY






(a) Disconnect the 2 connectors.
(b) Detach the claw and remove the wiper switch.
NOTE: If the claw is pushed with excessive force, it may break.