Installation

WIPER AND WASHER: WIPER SWITCH: INSTALLATION

INSTALLATION

1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY






(a) Attach the claw and install the wiper switch.
(b) Connect the 2 connectors.
2. INSTALL STEERING COLUMN COVER (w/o Driver Monitor Camera)






(a) Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.
(b) Attach the claw to install the upper steering column cover.
(c) Attach the 2 claws to install the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.





(d) Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.
3. INSTALL STEERING COLUMN COVER (w/ Driver Monitor Camera)
(a) Connect the connector.






(b) Attach the 4 clips to install the steering column cover upper onto the instrument panel cluster finish panel.
(c) Attach the claw to install the upper steering column cover.
(d) Attach the 2 claws to install the lower steering column cover.
NOTE: Do not damage the tilt and telescopic switch.





(e) Using a screwdriver, while turning the steering wheel to the right and left, install the 3 screws.