Removal

AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE SWITCH AND VOLUME CASE Removal

4. REMOVE NO. 2 STEERING WHEEL COVER LOWER Removal

5. REMOVE STEERING PAD Removal







6. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 screws and steering pad switch.