Removal

1UR-FSE ENGINE MECHANICAL: WATER PUMP: REMOVAL

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER Service and Repair

2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

4. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY Removal

5. REMOVE ENGINE ROOM SIDE COVER RH Removal

6. REMOVE NO. 1 AIR CLEANER INLET Removal

7. REMOVE RADIATOR RESERVOIR ASSEMBLY Removal

8. REMOVE INTAKE AIR CONNECTOR PIPE Removal

9. REMOVE V-RIBBED BELT Removal

10. DISCONNECT OIL LEVEL DIPSTICK GUIDE






(a) Disconnect the bolt and dipstick guide.
11. DISCONNECT NO. 2 RADIATOR HOSE
12. DISCONNECT NO. 5 WATER BY-PASS HOSE






(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 5 water by-pass hose.
13. DISCONNECT WATER INLET HOSE






(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the water inlet hose.
14. DISCONNECT NO. 3 WATER BY-PASS HOSE






(a) Using needle-nose pliers, grip the claws of the clip and slide the clip to disconnect the No. 3 water by-pass hose.
15. REMOVE WATER INLET HOUSING






(a) Remove the 3 bolts, water inlet housing and gasket.
16. REMOVE WATER PUMP PULLEY






(a) Using SST, hold the water pump pulley.
SST: 09960-10010
09962-01000
09963-01000
(b) Remove the 4 bolts and water pump pulley.
17. REMOVE WATER PUMP






(a) Remove the 9 bolts, water pump and gasket.