Removal

THEFT DETERRENT: SECURITY INDICATOR LIGHT ASSEMBLY: REMOVAL

REMOVAL

1. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
NOTE: After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Removal

4. REMOVE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY Removal

5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Removal

6. REMOVE INDICATOR LIGHT ASSEMBLY Removal

7. REMOVE INDICATOR LIGHT BRACKET Removal

8. REMOVE INDICATOR LIGHT COVER Removal