Rear Power Window Switch LH Circuit

WINDSHIELD / WINDOWGLASS: POWER WINDOW CONTROL SYSTEM: Rear Power Window Switch LH Circuit

Rear Power Window Switch LH Circuit

DESCRIPTION

This circuit supplies power to operate the multiplex network switch.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK WIRE HARNESS (MPX SWITCH - BATTERY POSITIVE AND BODY GROUND)





(a) Disconnect the O1 connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
Voltage:






Resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE