Removal

SUSPENSION: REAR STABILIZER BAR:

REMOVAL

1. REMOVE REAR WHEEL
2. REMOVE NO. 2 DIFFERENTIAL SUPPORT PROTECTOR Removal

3. REMOVE REAR STABILIZER LINK ASSEMBLY LH






(a) Remove the nut, and separate the rear stabilizer link assembly LH from the rear stabilizer bar. (A)
NOTE: Be sure to hold the stud bolt using a hexagon wrench 6 in order to prevent the bolt from turning.

(b) Remove the bolt, nut, and the stabilizer link assembly LH. (B)
4. REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedures for the RH side and LH side.

5. REMOVE REAR STABILIZER BAR






(a) Remove the 4 bolts, 2 stabilizer brackets, 2 rear stabilizer bushing, and rear stabilizer bar.