Removal

CRUISE CONTROL: MILLIMETER WAVE RADAR SENSOR:

REMOVAL

1. DISCONNECT BATTERY NEGATIVE TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation Service Precautions.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE FRONT BUMPER ASSEMBLY Removal

4. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY
(a) Disconnect the connector.






(b) Remove the 3 bolts and the millimeter wave radar sensor assembly.