Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY:

INSTALLATION

1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY






(a) Connect the connector.
NOTE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag assembly with the 3 bolts.
Torque: 10 Nm (102 kgf-cm, 7 ft-lbf)
2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. INSTALL INSTRUMENT SIDE PANEL Installation

4. INSTALL FRONT DOOR OPENING TRIM COVER Installation

5. INSTALL FRONT DOOR SCUFF PLATE (w/ Illumination)
6. INSTALL FRONT DOOR SCUFF PLATE (w/o Illumination)
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
HINT: Some systems need initialization after reconnecting the cable to the negative battery terminal.

9. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.