Removal

LIGHTING: HEADLIGHT ASSEMBLY:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for HID Headlight)
2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE FRONT BUMPER ASSEMBLY Removal

4. REMOVE FRONT BUMPER ENERGY ABSORBER Disassembly

5. REMOVE ENGINE ROOM SIDE COVER






(a) Using a clip remover, remove the 4 clips.
(b) Disengage the nut and remove the engine room side cover.
6. REMOVE FRONT UPPER FENDER PROTECTOR






(a) Disengage the 2 claws and 3 clips and remove the front upper fender protector.
7. REMOVE HEADLIGHT ASSEMBLY






(a) Disconnect the connector as shown in the illustration.






(b) Remove the 3 bolts.
(c) Disengage the headlight bracket pin and remove the headlight assembly.