Disassembly

INSTRUMENT PANEL: INSTRUMENT PANEL SAFETY PAD:

DISASSEMBLY

1. REMOVE NO. 1 HEATER TO REGISTER DUCT






(a) Remove the 3 screws [F] and the No. 1 heater to register duct.
2. REMOVE NO. 3 HEATER TO REGISTER DUCT






(a) Remove the 3 screws [F] and the No. 3 heater to register duct.
3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT






(a) Remove the screw [F] and the side No. 1 defroster nozzle duct.
4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT






(a) Remove the screw [F] and the side No. 2 defroster nozzle duct.
5. REMOVE DEFROSTER NOZZLE ASSEMBLY






(a) Remove the 3 screws [F] and the defroster nozzle assembly.
6. REMOVE NO. 2 HEATER TO REGISTER DUCT






(a) Remove the 4 screws [F] and the No. 2 heater to register duct.
7. REMOVE SIDE DEFROSTER NOZZLE






(a) Disengage the 4 claws and remove the side defroster nozzle.
8. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY Removal

9. REMOVE NAVIGATION ANTENNA Removal

10. REMOVE NO. 2 INSTRUMENT PANEL WIRE






(a) Disconnect the connector.
(b) Disengage the 5 clamps and remove the No. 2 instrument panel wire.
11. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY Removal

12. REMOVE DEFROSTER NOZZLE GARNISH






(a) Disengage the 8 claws and 2 clips, and then remove the defroster nozzle garnish.
13. REMOVE AUTOMATIC LIGHT CONTROL SENSOR






(a) Disengage the 2 claws and remove the automatic light control sensor.
14. REMOVE ENGINE SWITCH






(a) Disengage the 2 claws and remove the engine switch.
15. REMOVE INSTRUMENT PANEL SPACER