Removal

4GR-FSE ENGINE MECHANICAL: ENGINE FRONT OIL SEAL:

REMOVAL

1. REMOVE RADIATOR ASSEMBLY Removal.

2. REMOVE V-RIBBED BELT Removal

3. REMOVE CRANKSHAFT PULLEY






(a) Using SST, loosen the pulley bolt.
SST: 09950-50013
09951-05010
09952-05010
09953-05020
09954-05021






(b) Tighten the pulley bolt to 2 or 3 threads of the crankshaft.
(c) Using SST, remove the pulley bolt and pulley.
SST: 09213-70011
09213-70020
SST: 09330-00021

HINT: Apply grease to the threads and tip of the SST (center bolt) prior to use.





(d) Remove the pulley set key of the key groove.
4. REMOVE TIMING CHAIN CASE OIL SEAL






(a) Using a screwdriver with its tip taped, pry out the oil seal.

HINT: Tape the screwdriver tip before use.
NOTE: After the removal, check the crankshaft for damage. If it is damaged, smooth the surface with 400-grit sandpaper.