Removal
AUDIO / VISUAL: RADIO RECEIVER:
REMOVAL
1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) Removal
2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) Removal
3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal
4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Removal
5. REMOVE CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Removal
6. REMOVE REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal
7. REMOVE FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Removal
8. REMOVE FRONT ASH RECEPTACLE SUB-ASSEMBLY Removal
9. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
10. REMOVE CONSOLE BOX Removal
11. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Removal
12. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Removal
13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
(a) Remove the 4 bolts.
(b) Pull the integration control panel w/ radio receiver assembly toward the rear of the vehicle.
(c) Disconnect each connector and remove the panel.
14. REMOVE NO. 1 RADIO BRACKET (w/o Navigation System)
(a) Remove the 6 bolts and radio No. 1 bracket.
15. REMOVE NO. 2 RADIO BRACKET (w/o Navigation System)
(a) Remove the 6 bolts and radio No. 2 bracket.
16. REMOVE RADIO RECEIVER ASSEMBLY (w/o Navigation System)
(a) Slide the integration control panel in the direction shown by the arrow to remove the radio receiver assembly.
17. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
(a) Remove the 4 bolts.
(b) Pull the multi-display w/ radio receiver assembly toward the rear of the vehicle.
(c) Disconnect each connector and remove the multi-display.
18. REMOVE NO. 1 RADIO BRACKET (w/ Navigation System)
(a) Disengage the connector clamp.
(b) Remove the 7 bolts and radio No. 1 bracket.
19. REMOVE NO. 2 RADIO BRACKET (w/ Navigation System)
(a) Remove the 7 bolts and radio No. 2 bracket.
20. REMOVE RADIO RECEIVER ASSEMBLY (w/ Navigation System)
(a) Slide the multi-display in the direction shown by the arrow to remove the radio receiver assembly.