Installation
AUDIO / VISUAL: RADIO RECEIVER:
INSTALLATION
1. INSTALL RADIO RECEIVER ASSEMBLY (w/o Navigation System)
(a) Install the radio receiver assembly as shown in the illustration.
2. INSTALL NO. 2 RADIO BRACKET (w/o Navigation System)
(a) Install the radio No. 2 bracket with the 6 bolts.
3. INSTALL NO. 1 RADIO BRACKET (w/o Navigation System)
(a) Install the radio No. 1 bracket with the 6 bolts.
4. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)
(a) Connect each connector.
(b) Install the integration control panel w/ radio receiver assembly with the 4 bolts.
5. INSTALL RADIO RECEIVER ASSEMBLY (w/ Navigation System)
(a) Install the radio receiver assembly as shown in the illustration.
6. INSTALL NO. 2 RADIO BRACKET (w/ Navigation System)
(a) Install the radio No. 2 bracket with the 7 bolts.
7. INSTALL NO. 1 RADIO BRACKET (w/ Navigation System)
(a) Install the radio No. 1 bracket with the 7 bolts.
(b) Engage the connector clamp.
8. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)
(a) Connect each connector.
(b) Install the the multi-display w/ radio receiver assembly with the 4 bolts.
9. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL Installation
10. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY Installation
11. INSTALL CONSOLE BOX Installation
12. INSTALL CONSOLE BOX REGISTER ASSEMBLY Installation
13. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY Installation
14. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation
15. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) Installation
16. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) Installation
17. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation
18. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) Installation
19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
21. ADJUST CLOCK