Removal

SUSPENSION: FRONT STABILIZER BAR (for 4WD):

REMOVAL

1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
HINT: Refer to the instructions for removal of the engine assembly (4GR-FSE) Removal.

2. REMOVE FRONT STABILIZER LINK ASSEMBLY LH






(a) Remove the 2 nuts and the front stabilizer link assembly LH.
HINT: If the ball joint turns together with the nut, use a hexagon (6 mm) wrench to hold the stud.

3. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Remove the RH side following the same procedure as for the LH side.

4. REMOVE FRONT NO. 2 STABILIZER BRACKET LH






(a) Remove the 2 bolts and the front No. 2 stabilizer bracket LH from the front suspension crossmember.
5. REMOVE FRONT NO. 2 STABILIZER BRACKET RH
HINT: Remove the RH side following the same procedure as for the LH side.

6. REMOVE FRONT NO. 1 STABILIZER BAR BUSHING
(a) Remove the 2 front No. 1 stabilizer bar bushings from the front stabilizer bar.
7. REMOVE FRONT STABILIZER BAR
(a) Remove the front stabilizer bar from the vehicle.