Component Tests and General Diagnostics

OTHER SYSTEM: CLOCK:

ON-VEHICLE INSPECTION

1. INSPECT CLOCK ASSEMBLY (w/o Navigation System)






(a) Disconnect the J54 connector.
(b) Measure the voltage according to the value(s) in the table below.

Standard voltage:





(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:





HINT: If the value is not as specified, repair or replace wire harness or connector.

2. INSPECT CLOCK ASSEMBLY (w/ Navigation System)






(a) Disconnect the J53 connector.
(b) Measure the voltage according to the value(s) in the table below.

Standard voltage:





(c) Measure the resistance according to the value(s) in the table below.

Standard resistance:





HINT: If the value is not as specified, repair or replace the wire harness or connector.