Removal

LIGHTING: LICENSE PLATE LIGHT ASSEMBLY: REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE LUGGAGE COMPARTMENT DOOR COVER Removal

3. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE







4. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 screws and switch from the luggage compartment door.
5. REMOVE LICENSE PLATE LIGHT ASSEMBLY





(a) Disconnect the connector.






(b) Remove the 2 screws and license plate light from luggage compartment door.






6. REMOVE BACK DOOR GARNISH RETAINER SUB-ASSEMBLY
(a) Remove the 2 screws.
(b) Remove the 2 clips and retainer from the luggage compartment door.