Removal

METER: COMBINATION METER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE STEERING COLUMN COVER UPPER
For 2GR-FSE Removal
For 1UR-FSE Removal

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
(a) Using a screwdriver, detach the 5 clips.
HINT:
Tape the screwdriver tip before use.

(b) Remove the cluster finish panel and then disconnect the connector.

4. REMOVE COMBINATION METER ASSEMBLY
(a) Remove the 4 screws.
(b) Disconnect the connector and remove the combination meter.
5. REMOVE COMBINATION METER GLASS

(a) Using a screwdriver, detach the 2 claws and open the cover.
HINT:
Tape the screwdriver tip before use.

(b) Disconnect the 3 connectors.