Installation

EXTERIOR: REAR SPOILER: INSTALLATION

HINT:
- When installing the spoiler, heat the vehicle body and spoiler using a heat light.
- A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

Heating temperature:





NOTICE:
Do not heat the body and spoiler excessively.

1. INSTALL REAR SPOILER SUB-ASSEMBLY
(a) Clean the vehicle body surface.
(1) Using a heat light, heat the vehicle body surface.
(2) Remove the double-sided tape from the vehicle body.
(3) Wipe off any tape adhesive residue with cleaner.
(b) If reusing the spoiler:
Clean the spoiler.
(1) Using a heat light, heat the spoiler.
(2) Remove the double-sided tape from the spoiler.
(3) Wipe off any tape adhesive residue with cleaner.
(4) Apply new double-sided tape to the spoiler.
(c) Install the spoiler.
(1) Using a heat light, heat the vehicle body and spoiler.
(2) Remove the peeling paper from the face of the spoiler.
HINT:
After removing the peeling paper, keep the exposed adhesive free from foreign matter.





(3) Install the spoiler with the 4 nuts and clip.
2. INSTALL LUGGAGE COMPARTMENT DOOR COVER

3. INSTALL DOOR INSIDE HANDLE BEZEL

4. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP