Trunk / Liftgate Motor: Testing and Inspection

ENGINE HOOD / DOOR: LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY: INSPECTION

1. INSPECT LUGGAGE COMPARTMENT DOOR CLOSER ASSEMBLY





(a) Apply battery voltage to the closer motor and check operation of the motor.
OK:





- If the result is not as specified, replace the closer.





(b) Measure the resistance of the switch.
Standard resistance:





If the result is not as specified, replace the closer.

(c) Measure the resistance of the open/close position detection switch.





Standard resistance (Open switch):






Standard resistance (Closer switch):





- If the result is not as specified, replace the closer.