Disc cannot be Inserted or is Ejected Right After Insertion

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Disc cannot be Inserted or is Ejected Right After Insertion

Disc cannot be Inserted or is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF PROPER DISC IN INSERTED
(a) Make sure that the disc is a normal audio disc, and that it is not deformed, flawed, burred or otherwise defective.
OK:
Normal audio disc.
HINT:

NG -- DISC IS FAULTY
OK -- Continue to next step.
2. CHECK THAT DISC IS INSERTED PROPERLY
(a) Check whether or not the disc is inserted upside down.
OK:
Disc is properly inserted.
NG -- INSERT DISC PROPERLY
OK -- Continue to next step.
3. CLEAN DISC





(a) Clean the disc by wiping the disc's underside radially with a soft cloth.
OK:
Malfunction disappears.
NOTICE:
Do not use a conventional record cleaner or antistatic preservative.

OK -- DISC WAS DIRTY
NG -- Continue to next step.
4. REPLACE DISC WITH ANOTHER AND RECHECK
(a) Replace the disc with a normal one and check if the same problem occurs again.
OK:
Malfunction disappears.
NG -- PROCEED TO NEXT INSPECTION PROCEDURE SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- DISC IS FAULTY