B2065

PRE-COLLISION: PRE-COLLISION SYSTEM: B2065: Distance Control ECU Malfunction

DTC B2065 - Distance Control ECU Malfunction

DESCRIPTION





INSPECTION PROCEDURE
NOTICE:
When the seat belt control ECU is replaced with a new one, Active Test must be performed. Pre-Collision System

PROCEDURE

1. CHECK DTC (DYNAMIC RADAR CRUISE CONTROL SYSTEM)
(a) Delete the DTC Pre-Collision System.
(b) Check for DTC.
OK:
DTC P1617 is not output.
NG -- GO TO DYNAMIC RADAR CRUISE CONTROL SYSTEM
OK -- Continue to next step.
2. CHECK DTC (PRE-COLLISION SYSTEM)
(a) Delete the DTC Pre-Collision System.
(b) Recheck for DTC.
OK:
DTC B2065 is not output.
NG -- REPLACE SEAT BELT CONTROL ECU
OK -- END