Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE REAR WHEEL
2. REMOVE DIFFERENTIAL NO. 2 SUPPORT PROTECTOR Removal

3. REMOVE REAR STABILIZER LINK ASSEMBLY LH






(a) Remove the nut, and separate the rear stabilizer link assembly LH from the rear stabilizer bar.
NOTICE:
Be sure to hold the stud bolt using a hexagon wrench 6 in order to prevent it from turning.

(b) Remove the bolt, nut and the stabilizer link assembly LH.
4. REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT:
Use the same procedures for the RH side and LH side.

5. REMOVE REAR STABILIZER BAR






(a) Remove the 4 bolts and the rear stabilizer bar.
HINT:
The stabilizer bracket and bush are built onto the stabilizer bar. If the bracket and/or bush detach from the bar, replace the bar.