Removal

SUSPENSION: REAR UPPER NO. 1 CONTROL ARM: REMOVAL

1. REMOVE REAR WHEEL
2. REMOVE DIFFERENTIAL NO.2 SUPPORT PROTECTOR Removal

3. SEPARATE REAR SHOCK ABSORBER WITH COIL SPRING






(a) Remove the bolt and nut, and separate the rear stabilizer link assembly and the load sensing valve sensor bracket from the rear No.2 suspension arm.
(b) Remove the bolt and nut, and separate the rear shock absorber with coil spring from the rear No.2 suspension arm assembly.
4. REMOVE REAR UPPER NO.1 CONTROL ARM






(a) Remove the bolt, nut washer, and separate the rear upper No.1 control arm from the rear axle carrier.
NOTICE:
Push the axle carrier downward.





(b) Remove the bolt, nut washer, and the rear upper No.1 control arm from the rear suspension member.