Removal

2GR-FE COOLING: THERMOSTAT:

REMOVAL

1. DRAIN ENGINE COOLANT
2. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

3. REMOVE COOL AIR INTAKE DUCT SEAL
4. REMOVE ENGINE ROOM SIDE COVER RH
5. REMOVE FRONT FENDER APRON SEAL RH
6. REMOVE NO. 2 ENGINE MOUNTING STAY RH Removal

7. REMOVE ENGINE MOVING CONTROL ROD SUB-ASSEMBLY Removal

8. REMOVE V-RIBBED BELT Removal

9. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY Removal

10. DISCONNECT RADIATOR HOSE OUTLET Removal

11. REMOVE WATER INLET






(a) Remove the 2 nuts and water inlet.
12. REMOVE THERMOSTAT
(a) Remove the gasket from the thermostat.