Installation

EXTERIOR: REAR BUMPER:

INSTALLATION

1. INSTALL REAR BUMPER ASSEMBLY (w/o Intuitive Parking Assist System)

(a) Engage each claw.
(b) Install the rear bumper assembly with the 2 clips, 4 screws and 2 bolts.
Bolt - Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
Screw - Torque: 2.0 Nm (20 kgf-cm, 18 in-lbf)

(a) Install the grommet.
(b) Connect the connector.

(c) Engage each claw.
(d) Install the rear bumper assembly with the 2 clips, 4 screws and 2 bolts.
Bolt - Torque: 5.5 Nm (56 kgf-cm, 49 in-lbf)
Screw - Torque: 2.0 Nm (20 kgf-cm, 18 in-lbf)

(e) Install the 2 rear bumper plates.
3. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER RH (w/ Intuitive Parking Assist System) Reassembly

4. INSTALL REAR FLOOR FINISH PLATE (w/ Intuitive Parking Assist System) Reassembly

5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (w/ Intuitive Parking Assist System) Reassembly

6. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY (w/ Intuitive Parking Assist System) Reassembly

7. INSTALL SPARE WHEEL COVER TRAY (w/ Intuitive Parking Assist System)
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Intuitive Parking Assist System)